Hi,
I puplished a document describing how CCLM with SolMan SP12 can support you in decommission your custom code objects.
Please have a look at: https://scn.sap.com/docs/DOC-60525
Best regards,
Thomas
↧
How to decommission custom code objects with SolMan 7.1 SP12
↧
CCLM Dashboard, no usage detail of Tables
Hello Everybody,
I have experienced in CCLM Dahsboard app that Custom code usage is showing allways no usage for TABLE objects (All Tables asre Unused). After going through Solution manager Queries and also UPL information from managed system, I didn´t found any record of any custom table as well as other objects listed in dashboard app.
Image may be NSFW.
Clik here to view.
I checked also in Solman, the Queries builted by SAP like 0SM_CCL_OBJECT_COUNT or 0SM_CCL_USAGE_DETAIL to ensure dashboards reflects the information comming from BW contents accordingly but I´m not able to determine why table usage appears not accurate. I also went throught managed systems by checking report /SDF/SHOW_UPL but I couldn´t see any record regarding TABLES.
My question is,
Is there any problem/issue with regards to Data collect process in Extractor Framework or UPL process into Managed system?
Thanks a lot for your time
↧
↧
CCLM iCI Dashboard error bad request "no application data"
Hi,
We activated CCLM and iCI dashboard failed in error when we started it.
We can read bad request 400 "no application data".
Image may be NSFW.
Clik here to view.
We checked :
1] BI Content activation ==> Green
2] iCI CCLM Extractor ==> Green
3] BI data => Green
and query 0ESR_ICIDB_ALL => Failed with error 0CMONTH is invalid.
Image may be NSFW.
Clik here to view.
Thanks for help.
Best Regards
↧
Custom Code Management
Hello everyone!!!!
I am trying to configure CCM using solman(SS1) for R/3 system(RS1).During configuration process i do have some errors.Could someone help me out.
1) In the step 6.2 i am unable to activate SQLM extractor(error:SQLM extractor template does not exist). Rest of the extractors(CC Gen,CC Ref,UPL,CCLM,CC Similarity,ATC) are activated Successfully.
2)How to check activated extractors are functioning good?
3)In the step 7.2 SM_CCL:LUSG_XX_XXXX and SM_CCL_QUAL_XX_XXXX Jobs failed(Error: SM_CCL:LUSG_XX_XXXX was aborted ) same error with QUAL.
From the job log reason for job failure for QUAL is "No Data found in Custom Objects InfoCube (0SM_ATC) for system XXX" and for LUSG is " No Data found in Custom Objects InfoCube (0SM_UPL) for system XXX".
4)In the step 8.4 even though i scheduled the job "SM:AGS_CC_BUSI_CRIT_XXX" it is still showing Gray symbol instead of green.
5) From my knowledge we need to configure ATC on RS1. if that rite,what would be the values in "master system". and how to cross check ATC configuration is successful.
Actually all ATC,CCLM,SQLM,UPL cubes are active on my SS1 system.
↧
Missing_SID_City_Model
Hello Everyone,
I am working on CCLM and i configured CCM for three systems in our landscape(BD3,RD3,CD3) ,but in the city model(right side top corner) in the systems i am able to see only one(BD3) system.
could someone help me out to fix this.
↧
↧
UPL Activated in Managed Systems - Now What?
Hi All,
First post for me in the UPL SCN. I believe I have correctly activated UPL data collection in our managed ABAP Systems. (Followed this link to do so: https://websmp104.sap-ag.de/~sapidb1000358700000427102012E)
I can run the sa38 report /SDF/UPL_CONTROL and it shows that is in on and working. Also report /SDF/SHOW_UPL will show me a bunch of returned data when I click execute. (these are being ran on the abap systems themselves).
My question is, now what? Where do I go inside solution manager to begin seeing if this data is being stored in the SolMan BW? Any insight, work center locations, reports or anything else will help.
Thanks,
Zach
↧
RAGS_CC_GET_LANDSCAPES
Hello everybody!
CCLM Landscape Setup
To prepare the landscapes for CCLM it is recommended to execute the reportRAGS_CC_GET_LANDSCAPES
se 38-> RAGS_CC_GET_LANDSCAPES->Sap Solution
I don't understand problem and how to solve it?
↧
Useful Customer Exist
Installation (ES31) : EXIT_SAPLE20B_001
DIR Removal/Installation (EG35/EG34): EXIT_SAPLE30D_002
↧
Last_Usage_City_Model
Hello,
I am trying to configure CCM to achieve below objectives,Could someone help me to do so.
1) To find used objects for a particular period of time(Using Ad-Hoc Reporting) and list of all the users who used those objects.
i am able to pull the list of all used objects but i am unable to pull details about user.Could some one help me to pull the user details.
Image may be NSFW.
Clik here to view.
2)How to identify the Custom Code Objects that are without Security authorization.
3)How to identify the Custom Code Objects that are without Tcodes.
4)When i change the Systems on right top corner in city model,Number in custom code and modifications are not responding accordingly.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
5)When i select CS1 and RS1 in the systems(top right ) city model Quality(bottom rigth) is showing me data related to BS1 and CS1
↧
↧
Unused custom object - is it really so bad?
Hello, collegues.
I am curious about unused custom objects - is it really so bad to have several (or many) Z objects which are not used?
Yes, we can face challenges in upgrade project - when we have to modify/adapt Z code to new upgraded SAP standard object. But Clearing Analysis and UPL can solve this issue. When we have used/unused list of our Z objects we can no longer focus on code we don't need.
It doesn't executes, footprints isn't big at all (regarding PROG and FUNC). And as far as I know we don't need to feed Z code (smile).
So the question is quite simple and clear - how can unused PROG and FUNC affect SAP system?
What do you think?
Regards,
Anatoliy
Custom Code Management Team Lead
↧
Why I haven't settings menu and active systems?
Hi, people!
I haven't settings menu and active systems (Transaction CCLM)
My system
Image may be NSFW.
Clik here to view.
How it looks in other systems
↧
How to enable the ATC in the Solman
Hi All,
Currently i am working in ATC setup in Solution manager, I have checked the below blogs for the same.
Getting Started with the ABAP Test Cockpit for QMs and Admins
Completed the CCLM setup for required managed systems and activated ATC extractor.
I have below quires to push the ATC details option
1. Whether i need to execute the ATC t.code in Solution manager system or managed system or both.
2. Which System ID is need to maintain in the master system
3. What is the RFC ( TMW or Trusted or needs to created new RFC)
Image may be NSFW.
Clik here to view.
4. How to pull the ATC data to solution manager.
Whetehr i need to execute the belwo transfer setup in Solution manager or managed system or both
Image may be NSFW.
Clik here to view.
Please provide some idea for the above setup.
Rg,
Karthik
↧
Extractor Framework: Custom Code Library Extractor (new) and City Extractor dumps
Hello,
we are currently in Setup phase of CCLM after SP12 Upgrade and have also implemented all proposed notes from RTCCTOOL. After activating the cubes and step 6 of solman_setup our Custom Code Library Extractor and the Custom Code City Extractor are Dumping with the follwing error:
Custom Code Library Extractor (new): "Error occurred"
Custom Code City Extractor: "No Custom Code Objects fournd for SYSID in CCLM"
Image may be NSFW.
Clik here to view.
We want to perform Setup for 3 System Landscapes for the first trial. We also had the Version of previously ServicePacks up and running.
Can you give me a hint? I did not find this error description in the Custom Code Management Roadmap for SP12+.
Thank you.
↧
↧
Pre-requisites to configure CCLM on solman 7.1 sp12
Hi Experts,
We have a requirement to do configuration for CCLM . Before to work, i would like to know any pre-requisites to configure in solman like DIA agent ,DVM & etc.
Please provide your valuable suggestions.
Reg,
Chandu.
↧
Custom Code Management
Hello everyone!!!!
I am trying to configure CCM using solman(SS1) for R/3 system(RS1).During configuration process i do have some errors.Could someone help me out.
1) In the step 6.2 i am unable to activate SQLM extractor(error:SQLM extractor template does not exist). Rest of the extractors(CC Gen,CC Ref,UPL,CCLM,CC Similarity,ATC) are activated Successfully.
2)How to check activated extractors are functioning good?
3)In the step 7.2 SM_CCL:LUSG_XX_XXXX and SM_CCL_QUAL_XX_XXXX Jobs failed(Error: SM_CCL:LUSG_XX_XXXX was aborted ) same error with QUAL.
From the job log reason for job failure for QUAL is "No Data found in Custom Objects InfoCube (0SM_ATC) for system XXX" and for LUSG is " No Data found in Custom Objects InfoCube (0SM_UPL) for system XXX".
4)In the step 8.4 even though i scheduled the job "SM:AGS_CC_BUSI_CRIT_XXX" it is still showing Gray symbol instead of green.
5) From my knowledge we need to configure ATC on RS1. if that rite,what would be the values in "master system". and how to cross check ATC configuration is successful.
Actually all ATC,CCLM,SQLM,UPL cubes are active on my SS1 system.
↧
CCLM doesn't take into account my system data ?
Hi all,
I try to configure the CCLM tool on our Solman (7.1 SP12).
In order to display the Quality measures IN CCLM, i've activated ATC tool.
Image may be NSFW.
Clik here to view.
My current active run contains several errors, but in CCLM tool I only the last active run (with only 1 error).
All extractors are correctly set-up.
Image may be NSFW.
Clik here to view.
Why CCLM doesn't take into account the ATC result ?
As you can see, i've also problem with Custom Code counter (at the left top of the screen).
Last question about Criticality health factor. Extractor generates an error :
Image may be NSFW.
Clik here to view.
Do you have any idea about these problems ?
Thanks in advance for your reply.
↧
UPL Activated in Managed Systems - Now What?
Hi All,
First post for me in the UPL SCN. I believe I have correctly activated UPL data collection in our managed ABAP Systems. (Followed this link to do so: https://websmp104.sap-ag.de/~sapidb1000358700000427102012E)
I can run the sa38 report /SDF/UPL_CONTROL and it shows that is in on and working. Also report /SDF/SHOW_UPL will show me a bunch of returned data when I click execute. (these are being ran on the abap systems themselves).
My question is, now what? Where do I go inside solution manager to begin seeing if this data is being stored in the SolMan BW? Any insight, work center locations, reports or anything else will help.
Thanks,
Zach
↧
↧
Scope and Effort Analysis failed due to Similarity Data is too old
Hi All,
I am trying to generate Scope and Effort Analysis Report for EhP deployment of an ERP system. However, the analysis failed; in the Processing Log, the step "Provide Similarity (Clone Finder) data" shows "Similarity Data is too old".
What should I do in this situation? Is there any possibility to bypass this step?
Best regards,
Duy BPS Finland
↧
Unused custom object - is it really so bad?
Hello, collegues.
I am curious about unused custom objects - is it really so bad to have several (or many) Z objects which are not used?
Yes, we can face challenges in upgrade project - when we have to modify/adapt Z code to new upgraded SAP standard object. But Clearing Analysis and UPL can solve this issue. When we have used/unused list of our Z objects we can no longer focus on code we don't need.
It doesn't executes, footprints isn't big at all (regarding PROG and FUNC). And as far as I know we don't need to feed Z code (smile).
So the question is quite simple and clear - how can unused PROG and FUNC affect SAP system?
What do you think?
Regards,
Anatoliy
Custom Code Management Team Lead
↧
There is no app which can be added to this dashboard
Hi All,
When i am trying to add Custom Code App in solution manager, i get an error 'There is no app which can be added to this dashboard'. I could not find any info on how to fix this error.
Does you have any idea on this error?
Image may be NSFW.
Clik here to view.
thanks
Sai
↧