Hi Experts,
We have a requirement to do configuration for CCLM . Before to work, i would like to know any pre-requisites to configure in solman like DIA agent ,DVM & etc.
Please provide your valuable suggestions.
Reg,
Chandu.
↧
Pre-requisites to configure CCLM on solman 7.1 sp12
↧
Last_Usage_City_Model
Hello,
I am trying to configure CCM to achieve below objectives,Could someone help me to do so.
1) To find used objects for a particular period of time(Using Ad-Hoc Reporting) and list of all the users who used those objects.
i am able to pull the list of all used objects but i am unable to pull details about user.Could some one help me to pull the user details.
2)How to identify the Custom Code Objects that are without Security authorization.
3)How to identify the Custom Code Objects that are without Tcodes.
4)When i change the Systems on right top corner in city model,Number in custom code and modifications are not responding accordingly.
5)When i select CS1 and RS1 in the systems(top right ) city model Quality(bottom rigth) is showing me data related to BS1 and CS1
↧
↧
XLS download (Using OLE2_OBJECT) not working for WebGUI.
Hi,
I am using OLE2_object to download XLS document which contains ALV output of my report.
the functionality is working Fine when ran through SAP GUI (SE 38), But when I tried to run the same from WebGUI (Portal) functionality fails and ther is no file download.
following is the code which i used for achieving this functionality.
As per my observation CALL METHOD of gv_excel (type ole2_object) is not populating LV_MAPL (type ole2_object) and afterwards ,
when we CALL METHOD of LV_MAPL (type ole2_object) it returns sy-subrc = 2.
I tried debugging CALL METHOD OF but it is not possible to debug.
can you please help me to understand what is the difference while running the report functionality from SAP GUI and from WebGUI.
Thanks in advance
↧
UPL Activated in Managed Systems - Now What?
Hi All,
First post for me in the UPL SCN. I believe I have correctly activated UPL data collection in our managed ABAP Systems. (Followed this link to do so: https://websmp104.sap-ag.de/~sapidb1000358700000427102012E)
I can run the sa38 report /SDF/UPL_CONTROL and it shows that is in on and working. Also report /SDF/SHOW_UPL will show me a bunch of returned data when I click execute. (these are being ran on the abap systems themselves).
My question is, now what? Where do I go inside solution manager to begin seeing if this data is being stored in the SolMan BW? Any insight, work center locations, reports or anything else will help.
Thanks,
Zach
↧
How to enable the ATC in the Solman
Hi All,
Currently i am working in ATC setup in Solution manager, I have checked the below blogs for the same.
Getting Started with the ABAP Test Cockpit for QMs and Admins
Completed the CCLM setup for required managed systems and activated ATC extractor.
I have below quires to push the ATC details option
1. Whether i need to execute the ATC t.code in Solution manager system or managed system or both.
2. Which System ID is need to maintain in the master system
3. What is the RFC ( TMW or Trusted or needs to created new RFC)
4. How to pull the ATC data to solution manager.
Whetehr i need to execute the belwo transfer setup in Solution manager or managed system or both
Please provide some idea for the above setup.
Rg,
Karthik
↧
↧
Gap in UPL data on Managed System
Hi
For some reason I have a gap in my UPL data on my managed system. No idea why but there is a single day that doesn't appear in /SDF/SHOW_UPL but it does appear as having data in /SDF/UPL_LOG.
This is having a knock on effect in CCLM in that the UPL extractor tries to extract this data - as it sees it being the last day of data in 0SM_UPL and sees it as a valid date from /SDF/UPL_LOG. I have tried to 'fudge' the data in AGS_CC_STAT_TA to move the date to the next day but this table is rebuilt every time the extractor is executed.
Is the extractor supposed to cope with gaps or is there a way I can manually move it on?
Thanks
Ian
↧
CCLM doesn't take into account my system data ?
Hi all,
I try to configure the CCLM tool on our Solman (7.1 SP12).
In order to display the Quality measures IN CCLM, i've activated ATC tool.
My current active run contains several errors, but in CCLM tool I only the last active run (with only 1 error).
All extractors are correctly set-up.
Why CCLM doesn't take into account the ATC result ?
As you can see, i've also problem with Custom Code counter (at the left top of the screen).
Last question about Criticality health factor. Extractor generates an error :
Do you have any idea about these problems ?
Thanks in advance for your reply.
↧
Problem Overview CCLM "no data"
Hello,
We are implementing CCLM on Solman SP13.
We followed the configuration guide, all extractors are working fine and we do not have any authorization issues.
When we launch transaction "CCLM", we do not have any data on the "overview" part.
All other parts (library, decommissioning...) are showing data correctly.
We are using IE 10 or 11 and we also tried with chrome and firefox but the issue remains.
Do you have any idea where this problem could come from?
Thanks for your help!
Louise Bariohay.
↧
Custom Code Management
Hello everyone!!!!
I am trying to configure CCM using solman(SS1) for R/3 system(RS1).During configuration process i do have some errors.Could someone help me out.
1) In the step 6.2 i am unable to activate SQLM extractor(error:SQLM extractor template does not exist). Rest of the extractors(CC Gen,CC Ref,UPL,CCLM,CC Similarity,ATC) are activated Successfully.
2)How to check activated extractors are functioning good?
3)In the step 7.2 SM_CCL:LUSG_XX_XXXX and SM_CCL_QUAL_XX_XXXX Jobs failed(Error: SM_CCL:LUSG_XX_XXXX was aborted ) same error with QUAL.
From the job log reason for job failure for QUAL is "No Data found in Custom Objects InfoCube (0SM_ATC) for system XXX" and for LUSG is " No Data found in Custom Objects InfoCube (0SM_UPL) for system XXX".
4)In the step 8.4 even though i scheduled the job "SM:AGS_CC_BUSI_CRIT_XXX" it is still showing Gray symbol instead of green.
5) From my knowledge we need to configure ATC on RS1. if that rite,what would be the values in "master system". and how to cross check ATC configuration is successful.
Actually all ATC,CCLM,SQLM,UPL cubes are active on my SS1 system.
↧
↧
CDMC statistic collection activation - UPL deactivated error
Hi,
I am trying to activate the statistic collection in CDMC for my staging system through Solman, but one of my system showing below error " UPL Deactivated" .
So i am trying to activate the UPL from CCLM setup in solution manager, but UPL & ATC option are greyed out.
Also i checked the note1922412 UPL extractor flag fix for this fix, but this note shows " Cannot be implemented" status.
Currently i am using SAP Solution Manager 7.1 SP12 version.
Rg,
Karthik
↧
Workaround for GAP in UPL Data
Hi
The response by Alexander looks to be the long term solution for my issue but I'm just wondering that for a short term workaround to enable the extraction of data, that the job and program /SDF/UPL_PERIODIC_EXTRACTOR could be triggered to enable the purge of the /SDF/UPL_LOG entries. Recently this job has been failing due an unknown variant (not sure if this was to do with the SP12 upgrade or not) and therefore I have removed the variant.
I'll check the rerun of the job tomorrow and see if my issue goes away as a result but if anyone has any thoughts on the subject in the meantime, please jump right in!
Thanks
Ian
↧
UPL Activated in Managed Systems - Now What?
Hi All,
First post for me in the UPL SCN. I believe I have correctly activated UPL data collection in our managed ABAP Systems. (Followed this link to do so: https://websmp104.sap-ag.de/~sapidb1000358700000427102012E)
I can run the sa38 report /SDF/UPL_CONTROL and it shows that is in on and working. Also report /SDF/SHOW_UPL will show me a bunch of returned data when I click execute. (these are being ran on the abap systems themselves).
My question is, now what? Where do I go inside solution manager to begin seeing if this data is being stored in the SolMan BW? Any insight, work center locations, reports or anything else will help.
Thanks,
Zach
↧
There is no app which can be added to this dashboard
Hi All,
When i am trying to add Custom Code App in solution manager, i get an error 'There is no app which can be added to this dashboard'. I could not find any info on how to fix this error.
Does you have any idea on this error?
thanks
Sai
↧
↧
Benchmark about Customer code Cost and Customer code Obsolescence
Do anyone have a Benchmark or personal statistics about customer code cost? (how much the
Custom Code cost to be build and maintain over the years including upgrade cost)
Do anyone have a Benchmark about how the customer code is getting obsolete over the time? For instance
how many z-code become obsolete over the year; 10% per year 30% after each
upgrade??.
Any information that you can share could be useful to me.
Sergio Soccal
Engineering Architect /TQM I SAP Global Service & Support
Chile - SAP Región Sur
Rosario Norte 100 piso 13 |Las Condes | Santiago | Chile
T +56 2 2440 3614 I M +56 9 99973859
↧
Pre-requisites to configure CCLM on solman 7.1 sp12
Hi Experts,
We have a requirement to do configuration for CCLM . Before to work, i would like to know any pre-requisites to configure in solman like DIA agent ,DVM & etc.
Please provide your valuable suggestions.
Reg,
Chandu.
↧
CCLM doesn't take into account my system data ?
Hi all,
I try to configure the CCLM tool on our Solman (7.1 SP12).
In order to display the Quality measures IN CCLM, i've activated ATC tool.
My current active run contains several errors, but in CCLM tool I only the last active run (with only 1 error).
All extractors are correctly set-up.
Why CCLM doesn't take into account the ATC result ?
As you can see, i've also problem with Custom Code counter (at the left top of the screen).
Last question about Criticality health factor. Extractor generates an error :
Do you have any idea about these problems ?
Thanks in advance for your reply.
↧
Last_Usage_City_Model
Hello,
I am trying to configure CCM to achieve below objectives,Could someone help me to do so.
1) To find used objects for a particular period of time(Using Ad-Hoc Reporting) and list of all the users who used those objects.
i am able to pull the list of all used objects but i am unable to pull details about user.Could some one help me to pull the user details.
2)How to identify the Custom Code Objects that are without Security authorization.
3)How to identify the Custom Code Objects that are without Tcodes.
4)When i change the Systems on right top corner in city model,Number in custom code and modifications are not responding accordingly.
5)When i select CS1 and RS1 in the systems(top right ) city model Quality(bottom rigth) is showing me data related to BS1 and CS1
↧
↧
CCLM - Impossible to display Dashboard tab
Hi experts,
I try to activate the ICI Dashboards available in CCLM tool. I don't now why CCLM doesn't display the functionality.
Could you help me ?
Best regards
Ludovic Bento
↧
Documentation for CCLM on SolMan 7.1 SP12
Hi,
It seems the CCLM documentation in SCN is mostly 7.1 SP10 specific (see this link: https://websmp110.sap-ag.de/~sapidb/011000358700000426872012E). Is there an SP12 equivalent document?
We're having issues with SP12 specific functionality, such as the Citymodel, and I'd like to do my due diligence in reading the documentation to see if we missed a step.
Thanks,
David
↧
UPL data transferred after downtime
Hi
We are about to start up with UPL. During the period we will be logging, our Solution Manager system will be down for upgrade for a few days. Question is: How do we make sure that data collected in our Statistic system during this upgrade, are transferred to Solution Manager afterwards?
UPL data will not be purged until after 14 days (default) on the statistic system. I assume that when the job starts again (when Solution Manager is upgraded), all statistic data from the previous days will be transferred. But assuming is not enough. I need to see that it is stated somewhere that if transfer job between Statistic system and SolMan is "paused" for some days, data from these dates will still be transferred.
Can someone help me clarifying this?
Thank you
regards Ole
↧