Hi All,
When i am trying to add Custom Code App in solution manager, i get an error 'There is no app which can be added to this dashboard'. I could not find any info on how to fix this error.
Does you have any idea on this error?
thanks
Sai
↧
There is no app which can be added to this dashboard
↧
CDMC statistic collection activation - UPL deactivated error
Hi,
I am trying to activate the statistic collection in CDMC for my staging system through Solman, but one of my system showing below error " UPL Deactivated" .
So i am trying to activate the UPL from CCLM setup in solution manager, but UPL & ATC option are greyed out.
Also i checked the note1922412 UPL extractor flag fix for this fix, but this note shows " Cannot be implemented" status.
Currently i am using SAP Solution Manager 7.1 SP12 version.
Rg,
Karthik
↧
↧
Active implementation of BADI TRIP_POST_FI is not triggering.
Hi Experts
I implemented badi TRIP_POST_FI .
I provided the filter value , wrote custom code in MODIFY_PTRV_DOC_IT method as per requirement and activated the implementation.
now when I am posting my document via T-code PRRW this implementation is not called.
For checking if BADI implementation is called or not I am creating debugger break point in modified method.
system is not stopping at break point .is there any other way to check?
Can you help me understand why this implementation is not getting called.
Thanks in advance
↧
CCLM facing "service cannot be reached" error but don't know which service should be actiavated.
Dear Mr. /Ms,
In my test solman system (SP12), I tired to use CCLM transaction. It opened the website for the service. But in the "overview" of it, it shows "service cannot be reached" error. I assume some service was not activated. But I don't know which is it. 
By the way, mine solman is SP12, but as discribe in note 1547234, the attachment of it only provides untill SP10. I used this to upload the library ot it and it seems to be work. Is this OK?
Thanks,
Best regards,
Legend,
↧
Pre-requisites to configure CCLM on solman 7.1 sp12
Hi Experts,
We have a requirement to do configuration for CCLM . Before to work, i would like to know any pre-requisites to configure in solman like DIA agent ,DVM & etc.
Please provide your valuable suggestions.
Reg,
Chandu.
↧
↧
Missing_SID_City_Model
Hello Everyone,
I am working on CCLM and i configured CCM for three systems in our landscape(BD3,RD3,CD3) ,but in the city model(right side top corner) in the systems i am able to see only one(BD3) system.
could someone help me out to fix this.
↧
Special inventory reports
HI
In physical Inventory
Can we carry out or request a physical inventory report with quantities by customizing the fields below.
B High Risk
C High Value
E Weapons
Would we need to prepopulate these categories with proper part numbers or in our case NSN's to get such reports from other areas?
↧
RAGS_CC_GET_LAST_USAGE - force new start date
Hi All
I have a scenario where I have 365 days of UPL data extracted into my CCLM. There was no previous last used date calculated and held within tables AGS_CC_LAST_USG or AGS_CC_USAGE. Therefore, the program RAGS_CC_GET_LAST_USAGE run via the job SM_CCL:LUSG_<SID>_<INSTALLATION_NUMBER> has calculated the start date from the AGS_CC_EXTRACTOR table, setting it to sy-datum -3.
However, what I really need is to reset this date to last year. Currently I am thinking that I will have to somehow remove all the data for the SID in question, apart from one row with a last used date of the date I require.
Anyone else have this issue and found a better solution?
Thanks
Ian
↧
Problem Overview CCLM "no data"
Hello,
We are implementing CCLM on Solman SP13.
We followed the configuration guide, all extractors are working fine and we do not have any authorization issues.
When we launch transaction "CCLM", we do not have any data on the "overview" part.
All other parts (library, decommissioning...) are showing data correctly.
We are using IE 10 or 11 and we also tried with chrome and firefox but the issue remains.
Do you have any idea where this problem could come from?
Thanks for your help!
Louise Bariohay.
↧
↧
TextEdit UI element Enable/Disable for User input Dynamically Webdynpro
Hi Experts,
I have an TextEdit UI element in my Output and this needs to be Enable/Disable for User input Dynamically based on a condition. Buy default it will be enabled for user input.
As CL_WD_TEXT_EDIT is a protected class, I have created custom class as a sub class of CL_WD_TEXT_EDIT and tried SET_ENABLED and SET_DISPLAY_ONLY both the methods. But it's not working for me.
Please suggest is there any way to achieve the same.
Thanks,
Viswanath
↧
Pre-requisites to configure CCLM on solman 7.1 sp12
Hi Experts,
We have a requirement to do configuration for CCLM . Before to work, i would like to know any pre-requisites to configure in solman like DIA agent ,DVM & etc.
Please provide your valuable suggestions.
Reg,
Chandu.
↧
Active implementation of BADI TRIP_POST_FI is not triggering.
Hi Experts
I implemented badi TRIP_POST_FI .
I provided the filter value , wrote custom code in MODIFY_PTRV_DOC_IT method as per requirement and activated the implementation.
now when I am posting my document via T-code PRRW this implementation is not called.
For checking if BADI implementation is called or not I am creating debugger break point in modified method.
system is not stopping at break point .is there any other way to check?
Can you help me understand why this implementation is not getting called.
Thanks in advance
↧
Missing_SID_City_Model
Hello Everyone,
I am working on CCLM and i configured CCM for three systems in our landscape(BD3,RD3,CD3) ,but in the city model(right side top corner) in the systems i am able to see only one(BD3) system.
could someone help me out to fix this.
↧
↧
UPL Usage with Standard Support
We would like to use UPL and activate data collection in the Solution Manager. However we only run on SAP Standard Support.
Does anybody know, if SAP allows using UPL (especially SM BW Data Collection) with Standard Support?
I raise this question, because SAP stats “using CCM tools in Solman requires Enterprise support”
Thank you,
Stephan
↧
UPL Activated in Managed Systems - Now What?
Hi All,
First post for me in the UPL SCN. I believe I have correctly activated UPL data collection in our managed ABAP Systems. (Followed this link to do so: https://websmp104.sap-ag.de/~sapidb1000358700000427102012E)
I can run the sa38 report /SDF/UPL_CONTROL and it shows that is in on and working. Also report /SDF/SHOW_UPL will show me a bunch of returned data when I click execute. (these are being ran on the abap systems themselves).
My question is, now what? Where do I go inside solution manager to begin seeing if this data is being stored in the SolMan BW? Any insight, work center locations, reports or anything else will help.
Thanks,
Zach
↧
ATC not checking code in user exit includes
Dear Friends,
I'm not sure if you have faced this issue, but I have not found anyone or any post or any document or any OSS note talking about it.
I've recently have realized than when using ATC for checking the custom code of an Z include it was finding cero errors when it was actually full of them.
In fact using code inspector, the errors where found. It was not an issue of using a different variant, this was checked, CI and ATC are using the same,
The issue itself was clear: When the ATC checks a parent object its checks the code of its includes. If you try to check an include directly with ATC, it is ignored with message "No checks are available for the objects types", giving the chance to "add master program" so it will be checked when the master program is checked with all its includes. Last, ATC neither Code Inspector checks custom code.
The end result is that when trying to check the code in a user exit include with ATC it does not find any error.
I can think about encapsulating the code found in a user exits but this is a titanic task.
The main problem is that the jobs for getting in CCLM the quality required massive ATC runs that will not catch the errors in these kind of objects.
Have you face this issue? do you have any recommendation?
I would like your opinion before raising this as customer message, as from my point of this this may require a SAP correction.
Thanks
Aubin
↧
CCLM doesn't take into account my system data ?
Hi all,
I try to configure the CCLM tool on our Solman (7.1 SP12).
In order to display the Quality measures IN CCLM, i've activated ATC tool.
My current active run contains several errors, but in CCLM tool I only the last active run (with only 1 error).
All extractors are correctly set-up.
Why CCLM doesn't take into account the ATC result ?
As you can see, i've also problem with Custom Code counter (at the left top of the screen).
Last question about Criticality health factor. Extractor generates an error :
Do you have any idea about these problems ?
Thanks in advance for your reply.
↧
↧
Issue with field ZUONR and SGTXT not populated in reversal posting docoment
When we create the payment posting documents for a check payment for a employee we can see the fields ZUONR and SGTXT in the document created but while running reversal in offcycle workbench and subsequent activities using process model for reversal the document generated for payment posting are missing fields ZUONR and SGTXT.
Is there a Badi that needs to be implemented that can help populate fields ZUONR (assignment) and SGTXT (text) in the document.
We tried to look at the Badi SMOD_PCPO0001 but it seems to get triggered only during payment processing not during reversal.
what is happening
what we expect
↧
Last_Usage_City_Model
Hello,
I am trying to configure CCM to achieve below objectives,Could someone help me to do so.
1) To find used objects for a particular period of time(Using Ad-Hoc Reporting) and list of all the users who used those objects.
i am able to pull the list of all used objects but i am unable to pull details about user.Could some one help me to pull the user details.
2)How to identify the Custom Code Objects that are without Security authorization.
3)How to identify the Custom Code Objects that are without Tcodes.
4)When i change the Systems on right top corner in city model,Number in custom code and modifications are not responding accordingly.
5)When i select CS1 and RS1 in the systems(top right ) city model Quality(bottom rigth) is showing me data related to BS1 and CS1
↧
Analysis jobs in the managed system for CCLM does not run properly
Hi All,
As a part of CCLM configuration we have scheduled Analysis jobs to run in the managed system.
UPL jobs is running successfully.
But 2 jobs, Custom code Refrences and Custom code Similarity though indicates the job is finished successfully, the results are not as expected.
Below is the initial analysis carried out by me where i could not identify the cause of the issue.
Did anyone face same issues?
thanks
Sai
Initial Analysis:
We are configuring CCLM in solution manager SOD system, client 100
In step 6.3, Schedule Analysis Jobs, we have scheduled analysis jobs in PDS (managed) system and client 801
But the jobs don’t run correctly.
- Job /SDF/CC_REFERENCES
Job shows that it is completed successful but the job log mentions error
Job log does not indicate that the job completed successfully. This is misleading.
Could not find any note the SAP Market place with similar error.
Can you please advise on removing the error?
- Job EFWK ANALYSIS JOB FOR SIMILARITY completes successfully
There exists data in managed system PDS
But, if we check for the similarity details, in SOD:100 using report RAGS_CC_REPORTING, the result contains no data.
Number of records found ‘0’
Extractor for custom code similarity is also active
But looks like no data is fetched into solution manager SOD.
Can anyone please check and advise.
↧